Need help?Do you have a question about the Retsch RM200 and is the answer not in the manual?
General| Type | Mortar Grinder |
|---|---|
| Grinding Principle | Pressure and friction |
| Max Speed | 100 rpm |
| Number of grinding stations | 1 |
| Grinding Time | 1 - 99 min |
| Suitable for cryogenic grinding | No |
| Power connection | 1-phase |
| Power consumption | 250 W |
| Material feed size | 8 mm |
| Final fineness | 10 µm |
| Grinding Set Material | Agate, Stainless Steel, Zirconium Oxide |
| Setting of grinding time | Digital |
| Voltage | 50/60 Hz |
| Weight | 32 kg |
| Drive power | 250 W |
| Motor Power | 250 W |
General guidance for safe operation and responsibilities.
Visual indicators for potential hazards like injury or equipment damage.
Detailed descriptions and functions of each component on the RM200.
Explanation of the control panel's display, buttons, and LED indicators.
Identification and function of parts within the milling chamber (pestle, mortar, scraper).
Steps to position the pestle and set its pressure within the mortar.
Guidance on regrinding or setting the scraper to match the mortar.
Explanation of the machine's safety features and error codes.
To Next Page
