Need help?Do you have a question about the Retsch SR 300 and is the answer not in the manual?
General| Drive principle | Electric motor |
|---|---|
| Grinding tools material | Stainless steel |
| Power connection | Single-phase |
| Material feed size | < 80 x 80 mm |
| Batch size / feed quantity | Up to 5 L |
| Setting of grinding time | Digital timer |
| Suitable for | dry |
| Bowl clamping | Quick-clamp system |
| Power supply | 230 V / 50 Hz |
| Net weight | Approx. 50 kg |
| Power consumption | 1.1 kW |
| Power Input | 1.1 kW |
This document has been prepared with due care. Technical and software-based modifications are reserved.
This document or parts of it or its content may not be reproduced, distributed, edited or copied in any form without prior written permission of Retsch GmbH.
Explains the signs and symbols used in the document for safety warnings and information.
Provides general safety instructions for operating the device, including target group and safety manager responsibilities.
States that the manual does not contain repair instructions and repairs must be carried out by authorized personnel.
Details protective equipment features, like the door lock mechanism that prevents unsafe starts.
Specifies the degree of protection provided by the device, indicated by an IP rating.
Discusses acoustic signals and potential hearing damage, providing sound parameters and levels.
States the EMC class according to DIN EN 55011 standard.
Indicates the rated power consumption of the device.
Details the adjustable motor rotation speed range and increments.
Lists the overall dimensions and weight of the device, including optional base frame.
Specifies the necessary space for operation, including dimensions with open door and base.
Indicates the volume of the collecting receptacle used for sample material.
Specifies the maximum permissible size of the feed material.
Lists available sieve diameters and options for different grinding materials.
Describes packaging compliance with transport guidelines and storage recommendations.
Provides warnings and notices regarding safe transport, handling, and checking for damage.
Warns about potential damage from temperature fluctuations and condensation during transport.
Outlines the required installation height and ambient temperature range for the device.
Details electrical connection requirements, including fuse usage and type plate verification.
Explains the information provided on the device's type plate.
Instructions for setting up the device as a table-top unit, including removing transport profiles.
Instructions for assembling and setting up the device on an optional base frame.
Describes the intended use of the Rotor Beater Mill for grinding various materials and its limitations.
Explains the grinding mechanism involving impact, collision, and shearing effects.
Identifies and describes the function of the front components of the device.
Identifies and describes the function of the rear components of the device.
Details the procedure for switching the device on and off using the mains switch.
Explains the mechanical and electrical locking mechanisms for opening and closing the device door.
Provides instructions for emergency unlocking of the device in case of power failure.
Guides on inserting the grinding set components, including the rotor and sieve inserts.
Outlines the sequence for safely removing the grinding set components from the device.
Describes how to attach the sample receptacle and filter hose for collecting ground material.
Explains the function of each operating control, display element, and status indicator.
Details the manual operation of the device, including setting speed, starting, and stopping processes.
Lists error codes, their descriptions, and the corresponding measures to resolve them.
Explains information notices that inform the user about device processes without indicating faults.
Details the cleaning procedures for the grinding set components like rotor, cartridge, and retaining frame.
Provides instructions for cleaning the feed hopper and splashback protection.
Mentions that grinding tools may wear out and should be checked regularly.
Covers general maintenance recommendations, including lubrication and checking locking mechanism parts.
Describes the vibratory feeder DR 100 and its use for uniform material conveyance.
Explains the cyclone separator's function and its fitting with different collecting receptacles.
To Next Page
