Need help?Do you have a question about the Retsch PM400 and is the answer not in the manual?
Clarifies the meaning of various safety warning symbols and terms used in the manual.
Outlines fundamental safety rules for operating and handling the device to prevent injury or damage.
Step-by-step instructions and critical considerations for setting up the ball mill.
Critical instructions for safely connecting the machine to the power supply network.
Specific procedures for securing the device on its transport pallet and removing transport locks.
Defines the correct and safe applications for the Planetary Ball Mill PM400.
Critical procedure for manually opening the device in case of a power failure.
Details on the correct usage of the clamping bolt mechanism for securing jars.
Step-by-step guide for correctly placing the grinding jar into its support.
Instructions for fitting the clamping unit into the grinding station's brackets.
Explanation of how the locking sleeve operates to secure the grinding jar.
Procedure to safely unclamp and remove the grinding jar from the machine.
Steps for securely closing grinding jars using the provided locking mechanisms.
Detailed configuration settings for manual grinding control.
Setting the desired duration for the grinding process.
Adjusting the rotational speed for the grinding operation.
Crucial safety information regarding the correct clamping of grinding jars.
Routine maintenance tasks to ensure the ongoing operational safety of the device.
Maintenance procedures for ensuring the proper function of the grinding jar clamping mechanism.
Checking for wear on the clamping unit bases to maintain operational safety.
Checking the thickness of latching brackets for wear to prevent potential ejection.
General| Type | Planetary Ball Mill |
|---|---|
| Max Speed | 400 rpm |
| Final fineness | < 1 µm |
| Storable SOPs | 10 |
| Drive power | 1.5 kW |
| Protection code | IP 30 |
| Reverse Function | yes |
| Material of Grinding Jar | Stainless steel, tungsten carbide, agate, zirconium oxide |
| Number of Grinding Jars | 4 |
| Power Supply | 50/60 Hz |
| Feed size | ≤ 10 mm |
| Intermittent operation | Yes |
| Drive | 3-phase |
| Control | Microprocessor |
| Display | yes |
| Programmable Modes | yes |
| Timer | yes |
| Cooling System | Optional |
| Grinding Jar Volume | 12 ml to 500 ml |
To Next Page
