11 Accessories
Information on available accessories as well as the respective manuals are accessible directly
on the Retsch GmbH homepage (http://www.retsch.com) under the heading "Downloads" of the
device.
Information on wear parts and small accessories can be found in the Retsch GmbH general
catalogue also available on the homepage.
In case of any questions concerning spare parts please contact the Retsch GmbH
representative in your country, or Retsch GmbH directly.
11.1 Vibratory Feeder DR 100
When feeding larger quantities, it is generally recommended to use the vibratory feeder DR 100
for uniform conveyance of the feed material. This mainly avoids an unnecessary load on the
grinding set and ensures reproducibly exact results, as well as the economical use of the
downstream device.
NOTICE Observe the supplied manual before installing and operating the vibratory feeder
DR 100.
To Next Page
Loading...
