To Previous Page

NETWORKS

1.800.274.5308 \\ revgennetworks.com

PWR: The “POWER” light lets you know the router is

powered on. Solid green when powered on.

SYS: The “SYSTEM” light lets you know the router

ischeckingforanupdateoritsgoingthroughafirmware

update.Thislightblinksuntilfirmwarecheck,orupgradeis

done. DO NOT POWER OFF WHEN FLASHING.

2.4G: The “2.4Ghz Wi-Fi” light indicates that the 2.4Ghz

Wi-Fi connection is broadcasting. This light is solid when

there is not a device connected and blinking when

connected to another device.

5.8G: The “5.8Ghz Wi-Fi” light indicates that the 5.8Ghz

Wi-Fi connection is broadcasting. This light is solid when

there is not a device connected and blinking when

connected to another device.

4G/5G: The “4G/5G” light is your connection indicator,

and will be ON when you have a connection. This light will

be off if there is no connection at all. The light will be solid

when the router connectstotheSIMbank,andthen

flickeringwhenitgetsa cellular data connection.

USB: Future use, no functionality.

IQMC Light Pattern During

an Update

Tips:

• There are some cases where the router loses the

4G/5G light during this process. This does not affect

theupdateprocessorharmthefirmware.

• DO NOT POWER OFF DURING THE FIRMWARE

UPDATE PROCESS

Reset Button

If you experience issues with your router, you can hard

reset the router. Press the reset button for 2–3

seconds to perform a reset.

PWR 2.4G 4G/5G

SYS

5.8G

USB

PWR 2.4G 4G/5G

SYS

5.8G

USB

IQMC-412-520 LIGHTS

REVGEN NETWORKS IQMC412 User Manual

Questions and Answers: