NETWORKS
9
1.800.274.5308 \\ revgennetworks.com
WEB USER INTERFACE
Web User Interface
Your MR40’s Web User Interface (Web UI) allows you to setup and congure its various
functions . You can access the Web UI anytime by entering the router’s default address
192.168.1.1 in the address bar of web browser on a device connected to the MR40.
The default password is located on the label of the MR40 or on the box in which it came
with. The default password is usually “admin”.
Menu
The left side of the screen is a menu and is used to navigate.
Your IQMC’s Web User Interface (Web UI) allows you
to setup and configure its various functions . You can
access the Web UI anytime by entering the router’s
default address 192.168.1.1 in the address bar of
web browser on a device connected to the IQMC.
The default password is located on the label of the
IQMC or on the box. The default password is usually
“admin."
Menu
The left side of the screen is the navigation menu.
Saving Changes
Remember to save your changes to settings with the save
button located on the bottom of a page!
Saving Changes
Remember to save your changes to settings with the save button often located on the
bottom of a page where changes are possible.
Changing the Wi-Fi Network Name and Password.
It is advised to change your Wi-Fi network name and password to something you
can easily identify and share with others.
You can do this within the Web User Interface of your MR40.
Follow previous steps to log into your MR40.
Once you’re logged in, you may begin these steps.
1. Navigate to the “Network” —> “Wireless” page.
To Next Page
Loading...