16
Instructions for use
f Press the (+) Intensity Control one time to
start stimulation.
Continue to increase the intensity until you can feel or
see the muscles in your calves contract and relax. You
can set the intensity between 1-99.
You can use the buttons on the control panel or
remote control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
g Use an intensity that provides you with strong but
comfortable muscle contractions and note that the
intensity required may vary from day to day - eg using it
on 25 one day, does not necessarily mean you will need
to use if at 25 the next day. The required intensity could
be higher or lower than previous usage.
It is normal to feel tingling or varying sensations in
your calf muscles.
If you feel pain or discomfort:
• Remove one or both feet from the foot pads to
stop the stimulation.
• Lower the intensity of the foot pads using the
(–) Intensity Control on the control panel or
remote control before replacing your feet on
REVITIVE Advanced.
REVITIVE Advanced does not vibrate.
2296_IFU01_9608705.indd 16 17/07/2015 12:28
To Next Page
Loading...
