DAB
radio
GETTING READY FOR DAB OPERATION
Please ensure that the radio’s antenna is extended before operation
in DAB Mode.
To enter DAB MODE, press the button until the DAB MODE intro
screen is displayed, alternatively press then select MAIN MENU,
then DAB from menu option list.
When in DAB MODE for the fi rst time, SUPERCD will automatically
perform a scan to see what stations are being broadcast in your
area, before storing them alphabetically in the device’s memory.
It may be necessary to perform a manual scan from time to time, in
order to update your radio’s station list. This may be required for any
one of the following reasons:
1. Station availability can change from time to time as new stations
appear, or existing stations cease broadcasting.
2. If reception was poor during the initial automatic scan, for
example the antenna was not completely extended,
it may be that the station list is incomplete or even empty.
3. If you have poor reception on some of the stations (resulting in
broken or poor quality audio), you may wish to list only stations that
have a strong signal strength.
To start a manual scan, press the button then select SCAN from
the menu list.
When the scan is complete, your radio will list all available stations.
To remove stations that are listed but unavailable, press then
choose PRUNE INVALID. When asked whether you wish to ‘remove all
invalid stations’, select YES.
DAB RADIO MODE
10
Prune Invalid
This removes all invalid
stations, continue?
YES NO
Scan
Stations : 21
Scanning
To Next Page
Loading...