RANGE 3D Scanner User Manual
COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED 10
Step 2: Connect the PC to the RANGE.
1) Go to your Wi-Fi setting, search for a network called RANGE-
XXXXXX and connect. (No password is required)
2) Wait a few seconds for the scanner to be connected.
Step 3: Open Revo Scan on your computer.
RANGE on Smartphones
Android devices can connect via either USB and Wi-Fi. However, iOS
devices only support Wi-Fi mode.
System Requirements
Android: ≥Android 9.0
RAM: ≥ 6GB
*Harmony OS is supported.
To Next Page
Loading...
