EasyManua.ls Logo

Revox B215 User Manual

Revox B215
58 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Revox B215 and is the answer not in the manual?

Revox B215 Specifications

General IconGeneral
Track System4-track, 2-channel stereo
Tape Speed4.76 cm/s
Heads3 (erase, record, playback)
Signal to Noise Ratio72dB (Dolby C)
Total Harmonic Distortion0.8%
TypeCassette Deck
Frequency Response20Hz to 20kHz
Tape TypeType I, Metal
OutputsLine

Summary

1. GENERAL

1.1 How to use these operating instructions

Explains the structure and content of the operating instructions.

1.2 Checks and connecting the recorder to the AC supply

Details essential checks and AC power connection procedures.

1.2.1 Checks before first time operation

Specific checks required before operating the recorder for the first time.

1.3 Index of cassette recorder controls

Details all controls on the front and rear panels of the B215.

2. PLAYBACK INSTRUCTIONS

2.1 Playing a cassette

Step-by-step guide to playing a standard cassette tape.

2.2 Playback of a Dolbyized recording

Instructions for playing tapes with Dolby noise reduction.

2.3 Playback via headphones

How to connect and adjust volume for headphone playback.

2.4 Tape transport commands

Explains fast forward, rewind, and other tape movement functions.

3. RECORDING A CASSETTE

3.1 Preparations for recording

Steps before recording, including tape type and level setting.

3.1.1 Setting the record level with button SET LEVEL [9]

How to automatically set the recording level using the SET LEVEL button.

3.1.2 Manual setting/influencing of record level

Manual adjustment of recording input levels for optimal recording.

3.2 Recording procedure

How to start and manage recording sessions.

3.3 Which noise reduction system?

Guidance on selecting the appropriate noise reduction system.

3.4 Automatic alignment

Process for optimizing recorder settings for different tape types.

4. REAL-TIME COUNTER AND LOCATOR FUNCTIONS

4.1 Real-time counter

How the tape counter displays elapsed time and tape position.

4.2 Locator functions

Using memory locations to find specific tape points.

4.2.1 Entering the locator address

How to store or input specific tape locations into memory.

4.2.2 Reading out the address memory contents

Retrieving stored tape locations from memory.

4.2.3 Erasing the content of a LOC memory

How to delete stored tape locations from memory.

4.3 Loop (repeat) mode

Instructions for setting up a continuous playback loop.

5. REMOTE CONTROL

5.1 Remote control with hand-held infrared transmitter

Using the IR remote control for basic functions.

5.2 Defining the address

How to set the address for remote control operation.

5.3 SERIAL LINK socket

Information about the serial link for external control.

6. TIMER OPERATION

6.1 Preparations for timer operation

Steps to set up automatic operation using an external timer.

7. TECHNICAL APPENDIX

7.1 Maintenance of the cassette tape transport

Guide to cleaning and maintaining the tape transport mechanism.

7.2 Equalization 120 µs for IEC II cassettes

Specifics on equalization for type II cassettes.

7.3 Dimensions (mm)

Physical dimensions of the Revox B215 unit.

7.4 Technical data

Comprehensive technical specifications of the B215.

Related product manuals