Need help?Do you have a question about the Revox C115 and is the answer not in the manual?
General| Type | Cassette Deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.76 cm/s |
| Heads | 1 x record/playback, 1 x erase |
| Frequency Response | 30Hz to 20kHz (Metal tape) |
| Signal to Noise Ratio | 72dB (Dolby C) |
| Output | 0.775V (line) |
Safety and environmental precautions for operating the device.
Identification and function of the device's controls and buttons.
Socket for remote start/stop operation.
Steps for recording audio onto a cassette tape.
Steps for playing back a cassette tape.
Function to search for the start of a selection.
Stores tape addresses for later retrieval.
Important precautions before disassembly and handling MOS components.
Precautions for handling sensitive MOS components.
Information on maintenance and lubrication.
List of tools needed for disassembly and assembly.
Guidelines for reassembling the unit.
Steps to remove the top cover of the unit.
Detailed steps for removing the front panel assembly.
Details on fixing and adjusting tape guide rollers.
Information on record/reproduce and erase heads.
Procedure to remove the mains unit.
Steps to remove the power supply unit circuit board.
Description of the dual capstan tape transport mechanism.
Controls input keypad and microprocessor functions.
Description of power supply voltages and spooling motor control.
Explanation of the audio board's recording and playback sections.
Safety precautions and general notes for alignment.
List of required equipment and tools for alignment.
Procedure for demagnetizing the tape path components.
Defines voltage levels (dBu, Veff) used in calibration.
Procedure for checking and adjusting head height and azimuth.
Procedure for calibrating the peak meter.
Procedure for checking frequency response and MPX filter.
Procedure for measuring tape distortion.
Procedure for measuring signal-to-noise ratios.
Procedure for measuring the erase depth of recorded signals.
Procedure for measuring channel crosstalk.
Measurement of wow and flutter values.
To Next Page
