(address / command) was received last. A current RC5
reception is indicated by the display of [IR], shown in a light
colour here.
The version number shows the current firmware version of
the Voxnet 219.
If a module is installed in the Voxnet 219, its identity can be
determined through the display article number, here for
example, 1.563.080.00 from the I/O module.
The Voxnet 219's IP address that it received from the router
via DHCP is shown here.
Display of the Voxnet 219's own MAC address.
The Voxnet 219 switches itself off after the display loop is
completed assuming that no audio input has detected a
signal. Otherwise, the next time the Setup button is pressed,
the room identifier is displayed.
To Next Page
Loading...
