15
Voxnet peripherals
The Voxnet 219 is a network-based
amplifier that is assigned its functionality
and its operating mode configuration
through the Revox Voxnet Configurator.
This is described in a separate operating
manual,
"Voxnet Configurator"
.
The following hardware peripherals are
needed for the Voxnet system:
• DHCP router for the assignment of
IP addresses and for access to the
Internet for iRadio streams.
• Synology NAS, as specified by
Revox. Contains a Voxnet server
software in the DSM package
centre. This includes all Voxnet
services, the rights management
and the licence server. The
Synology NAS can be ordered from
Revox in a pre-configured state,
including the Voxnet server
software.
• Managed layer 2 switch (or higher)
with IGMP snooper functionality.
Revox has a list of recommended
switches to select from.
• Fixed-cabling 1 Gbit LAN - 100 Mbit
to the clients (Voxnet 219) is
sufficient.
• Separation of the Revox Voxnet
system in a VLAN or in a physically
separated network. In order to
ensure correct functioning, no
other clients, e.g. Smart TVs,
tablets, streaming products, etc.
should be present in the same
network. IP-controlled products
such as IP-serial converters or IP-
IP converters as offered by the
Global Caché
company for
example, can of course be
operated in the Voxnet network.
To Next Page
Loading...
