7
Rack installation
The Voxnet 219 is designed for
installation in a 19" rack. A shelf / tray
(Revox Article no.: 1.563.090.00) is
available as an accessory, which can
take two Voxnet amplifiers. The height of
the shelf is 1 U.
The tray can be built into the rack with
and without Voxnet amplifiers. Both
options are possible depending on the
installation environment.
The Voxnet 219 has a recess to the left
and right of the front edge which the
metal lugs of the tray (upper picture / )
fit into. Locate the amplifier, lined up
with the right or the left of the tray and
push it backwards until it reaches the
back wall of the tray. The amplifier is
now fixed in place horizontally at the
front and vertically.
Now turn your attention to the rear of the
tray. Two knurled thumb screws are
provided with each amplifier for fixing it
into place (lower picture / ). Screw the
amplifier into place with these until they
are hand-tight.
This completes the installation of the
Voxnet 219.
To Next Page
Loading...
