EasyManua.ls Logo

REWIRE SECURITY 104 PRO - Alarms; Geo-Fence

REWIRE SECURITY 104 PRO
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Switching standby modes OFF
All standby modes can be switched off by sending SMS command:
"sleep+password+space+off". Please note if you are using your
104-PRO in self contained , self powered mode, we do not recommend
turning standby modes off as the battery standby duration will be
reduced to 3 days.
Example: sleep123456 off
Response: sleep off ok!
IV. Alarms
1. Geo-Fence (Virtual Fence)
1.1 This function allows you to create safety zones of your choice. When 104
PRO enters or leaves this pre-determined zone, it will send geo-fence
alarm warning to authorized numbers.
When the unit stays immobile in a place for 3-10 minutes, you can send
SMS “stockade+password+space+latitude,longitude;latitude,longitude” to
the unit to set the restricted area. In case of a breach, it will send SMS
stockade!+location” to the authorized numbers every 3 minutes. Tracker
will stop sending alarm if the tracker returns to the restricted area
Note: The first latitude & longitude is coordinate of the top left corner of the
Geo-fence, while the second latitude & longitude is the coordinate of the
bottom right corner.

Related product manuals