To Next PageTo Next PageWhat to do if my REWIRE SECURITY 104 PRO shows 'NO GSM signal'?
If your REWIRE SECURITY GPS indicates 'NO GSM signal,' first ensure the GSM antenna is securely connected. Then, verify that the SIM card is correctly installed or try replacing it with another SIM card.
Why does my REWIRE SECURITY 104 PRO fail to turn on?
If your REWIRE SECURITY GPS fails to turn on, it's likely due to low battery power. Connect the device to a charger to resolve this issue.
Steps to register authorized phone numbers for device access.
How to get location information via SMS text messages.
Obtain the device's location as a street address via SMS.
Enable audio monitoring through the device.
Remotely disable the vehicle's engine for security.
Create safety zones; alerts when entering or leaving pre-determined areas.
Trigger alerts when the device moves beyond a set radius.
Alerts when the device exceeds a predetermined speed limit.
Detects and reports accidents based on strong vibration.
Alerts triggered by detected vibrations or shocks.
Notifies users when the device's battery level is critically low.
Alerts when the external power source has been disconnected.
Resets all device settings to their original factory configurations.
Configures the Access Point Name for GPRS data connection.
Configures server IP address and port for data upload.
General| Brand | REWIRE SECURITY |
|---|---|
| Model | 104 PRO |
| Category | GPS |
| Language | English |
