8
III. Functions
Note: With SMS text message commands, you will notice that we have
used “+” and “space” between some words;
“+” between two words means they should be written as one word, with
no spaces between. "space" between two words means you should leave
one character space.
e.g. : sleep+123456+space+shock should be sent to the tracker as
following ; sleep123456 shock
1. Switching your tracker ON/OFF
1.1 To turn your tracker "ON", move the ON/OFF switch to the ON position,
LED lights will flash, which shows that the tracker has been switched on.
2. Changing your tracker's password
Send SMS "password+old password+space+new password" to your tracker
to change its password. Passwords can only contain numbers. If you forget your
password, you can restore it to the default password using the command
"adminpassword13142324".
To Next Page
Loading...
