26
6. Shock Sensor alarm
6.1 Setup: Shock sensor alarm is deactivated by default. To activate send SMS
“shock+password” to the tracker, and it will reply “Shock is activated!”, this
means shock sensor alarm has set up successfully. When the tracker
detects vibration, it will send SMS “Sensor alarm+location” to authorized
numbers.
Example: shock123456
Response: shock ok!
6.2 Cancel: Send "noshock+password" to cancel the shock sensor alarm.
Example: noshock123456
Response: noshock ok!
6.3 Shock sensor sensitivity configuration:
The sensitivity of the built-in shock sensor has three different levels:
First level: Alarm will be triggered after detect slight vibration, send
command" sensitivity+password+space+1" .
Second level: Alarm will be triggered after detect 8 times vibration in 2
seconds, send command" sensitivity+password+space+2".
Third level: Alarm will be triggered after detect 25 times vibration in 5
seconds, send command" sensitivity+password+space+3".
Example: sensitivity123456 2
Response: sensitivity ok!
To Next Page
Loading...
