18
17
Time setup
Machine code setup
Language
Version
Press the OK key to view system information.
6.Camera Shooting
Camera shooting
VIDEO
Video lockup
Press the OK key to enter the password entry function. The
system default password is six zeros (000000). Input your current
password to modify the time. Press the UP and DOWN key to
key in specific inputs.
Press the OK key to confirm your input.
Press the OK key to enter the password entry function. The
system default password is six zeros (000000). Input your current
password to change machine mode. Press the UP and DOWN
key to key in specific inputs.
Press the OK key to confirm your input.
Press the OK key to enter the to-be-altered function. Press the
UP and DOWN key to select between languages. The system
default is English.
Press the OK key to confirm your selection.
Depressing the VIDEO key during camera shooting can lock
up the current video. Depress the VIDEO key again to unlock it.
The camera shooting function is not interrupted during this
process. A locked video cannot be deleted under the loop
recording mode.
Press the VIDEO key under the preview
screen in the power-on state, or depress
the VIDEO key for 3 seconds in the
power-off state to start camera shooting.
The red indicator light in upper right corner
starts to flash slowly during recording, and,
together with the red time indication, shows
recording duration. The operating status
indicating light turns red and starts to flash.
Press the VIDEO key again to stop camera
shooting. The working indicator light turns
green; the video file is automatically saved
to the memory card, the screen goes back
to shooting preview, and video file is saved
to the meory card with a time indication
and AVI as its suffix. To check the video,
refer to the section Video Review/Play-
To Next Page
Loading...
