2423
Instruction for IR light, flashing light,
and white light
7. Product Parameters
In the power-on state, hold the UP key to turn ON/OFF the IR
indicator light, which is used to provided additional
illumination when shooting at night. Please make sure that the
IR Switching is set to Manual to enable this function.
In the power-on state, hold the ENTER key to turn ON/OFF the
flashing light. The device alternately flashed a red and blue
light in addition to sounding a warning alarm. This alarm
functions in case of emergency.
In the power-on state, hold the DOWN key to turn ON/OFF the
white light. The device gives out a white light for illumination.
Lens
Language Selection
Video recording
Video rec. format
Video compression
Storage card
Video bitrate
Power
Battery
RAM capacity
Duration
F2.1 aperture, high resolution, multilayer
filter, wide angle lens
1080p 30FPS
720p 30 FPS
480p 30FPS
(three adjustable levels)
AVI
H.264
Built-in
8 Mbit/sec
5V/1A
Support Up to 128G
Continuous working hours: 11 hrs
Standby hours: 20 hrs
Chinese/ English
See decal affixed on the device
To Next Page
Loading...
