1615
Voice prompt
Timed power-off
Loop recording
On-board mode
Auto screen off
Factory setup
Password setup
Police ID setup
Press the OK key to enter the to-be-altered function. Press the
UP or DOWN key to select between ON and OFF. The system
default is ON.
Press the OK key to confirm your selection.
Press the OK key to enter the to-be-altered function. Press the
UP or DOWN key to select a value from the following: 1, 3, 5,
and 10 minutes. The system default is 3 minutes.
Press the OK key to confirm your selection.
Press the OK key to enter the to-be-altered function. Press the
UP or DOWN key to select between ON and OFF. The system
dafult is OFF.
Press the OK key to confirm your selection.
When this function is ON, old video files will be overwritten
when memory is insufficient. Press the OK key to enter the
to-be-altered function. You can select ON or OFF. The system
default is ON .
Press the OK key to confirm your selection.
When this function is
enabled, the screen will be powered off at
a set time. Press any key to restore power to the screen. Press
the OK key to enter the to-be-altered function. Press the UP and
DOWN key to select a value from the following: Off，3 minutes，
5 minutes or 10 minutes. The system default is 3 minutes.
Press the OK key to confirm your selection.
Press the OK key to enter the to-be-altered function. Press the
UP and DOWN key to select between YES or NO. The system
default is Cancel.
Press the OK key to confirm your selection.
Press the OK key to enter the password entry function. The
system default password is six zeros (000000). Input a password
to modify it. Press the UP or DOWN key to key in specific inputs.
Press the OK key to confirm your password.
Press the OK key to enter the password entry function. The
system default password is six zeros (000000). Input current a
password to change the police ID. Press the UP or DOWN key
to key in specific inputs.
Press the OK key to confirm your password.
To Next Page
Loading...
