38
To cascade your KVMs, use a 1-to-3 PS/2 KVM cable to connect one of your Master switch
’s PC 1-8
ports to the Slave KVM’s
console port. When turning on your cascaded switches, turn on the Master
switch before turning on any of the others.
B. KVM-OSD Operations
(For ALL models except MNIP/UNIP/UCIP-01, WMM-001, and WUM-001)
KVM-OSD screen illustration
UCIP-04 / 08 / 16, UNIP-04 / 08 / 16, and WUM-108D / 116D models offer “F5”, see Function
key F5 1
MNIP-04 / 08 / 16, WMM-001 / 108D / 116D, and WUM-001 models do not offer “F5” function
By hitting the left Ctrl key twice within two seconds, you may see the 'Hotkey Menu' if it is enabled
(a KVM-OSD option). Or, by hitting the left Ctrl key three times within two seconds, you will see a
'KVM MENU' screen showing a list of the computers with corresponding port numbers, names, and
statuses, see Figure 10.
The port number of the currently selected computer is displayed in red, same as the front indicator, at
the upper-right corner of the KVM-OSD menu.
To Next Page
Loading...
