Step one: Unfolding the Roamer
If this step is not completed prior to operating the Roamer, you risk
potential injury from unsafe usage.
Ensure the Roamer is upright and resting both its stability feet on a at, even, and
dry indoor oor surface. Ensure there is ample room for unfolding the Roamer.
Grasp the push handle rmly with one hand.
1)
2)
At the same time, use the other hand to hold the edge of the seat cushion and push
down.
3)
Ensure the Roamer is FULLY unfolded. The seat should be pushed all the way down,
and the seat-back should be perpendicular to the seat at a 90 degree angle.
4)
Sit on the seat until your back is fully against the seat-back.5)
IMPORTANT = Lean back and apply pressure to lock in the folding latch.6)
Ensure your feet are safely out of the way of the front caster wheels
(as they come down towards the ground).
Assembly (Cont.)
11
To Next Page
Loading...