Co.,Ltd. UV/IR Type Flame Detector RFD-2000X
Document No. Manual-2000X Rev.3
March 2013
- 9 -
3. Installation
3.1 Unpacking & Checking
Please check the external condition of detector when unpacking the product carefully. If
there is any damage on the products, please contact the local distributor immediately or
any trouble in used products, please send it to A/S center with fee applied.
3.1.1 Product Compositions
ㆍ RFD-2000X 1EA
ㆍ BK-2(Bracket) 1EA
ㆍ Spare Bolt 1set
3.1.2 Components
3.1.2.1 Fundamental components
Component standard Q'ty (pcs) Description
Hexagon wrench Bolt M6×10 2 Join the Detector and Bracket
Hexagon wrench Bolt
M6×35
(OEM)
4 Join the Detector
Metric button screw (+) M5×30 4 Install the Bracket
[Table 3] Fundamental components
3.1.2.2 Spare components
Component Standard Q'ty (pcs) Description
Hexagon wrench Bolt M6×10 2 Join the Detector and Bracket
Hexagon wrench Bolt
M6×35
(OEM)
4 Join the Detector
Metric button screw (+) M5×30 4 Install the Bracket
[Table 4] Space Components
3.1.3 Necessary tools
Tool name Standard Q'ty (pcs) Description
Hexagon wrench driver Metric,5M 1 Join the detector, bracket
[Table 5] Necessary tools
To Next Page
Loading...