rfid:wieg.rev.bits=False
This command does not reverse all bits. If true, the least significant bits are swapped with the most
significant bits.
rfid:wieg.rev.bytes=False
This command does not reverse all the bytes in the id.bits size field. If true, all bytes are reversed.
rfid:wieg.strip.lead.bits=1
This command strips 0 .. 15 bits from the most significant bits.
rfid:wieg.strip.trail.bits=1
This command strips 0 .. 15 bits from the least significant bits.
ACP Error Codes
ACP Errors Descriptions
Error#1 Illegal Command. Will return “Try “rfid:help”. Possible Wrong or missing prefix
“rfid:”
Error#2 Input buffer overrun. Too many characters received without CR or LF
Error#3 Illegal Operation. - Variable assigned to function or variable used as function
Error#4 Range Error. Value assigned to variable exceeds limit (EX: 257 for 255 limit)
58 Chapter 4 ASCII Command Protocol
To Next Page
Loading...
