RGBlink Mini+ User Manual

mini+ User Manual
30
2. Select Camera-Camera-RGBlink USB3.0 Capture.
3. Select the same resolution as the mini+ output. Then
click “OK”.
4. Click Stream setting button.
5. Complete the URL and Key information. Click “Start
1”,vMix will begin streaming.
Note: vMix does not support automatic recognition of the output resolution of mini+. Every time the output
resolution of mini+ is modified, the picture on vMix will pause. The user needs to re-select RGBlink USB3.0
Capture and manually input the current output resolution of mini+.

RGBlink Mini+ Specifications

General

Control	USB
Switching	Seamless
Downstream Key	Not supported
Audio Mixer	Not supported
Multiview	Not supported
HDR Support	Not supported
HDCP Support	Yes