RGBlink Mini+ - Source Switching and Transitions

mini+ User Manual
19
3.1.9 INFO
3.2 S Button
When you want to personalize your live show, you can use the mini+'s 14 built-in switching effects and control the
timing of the switch via T-BAR.
1. Push S button once to enter mode switch menu<MODE> and the LED indicator beside will light up
2. Push S button twice to enter mode switch menu<MODE> and the LED indicator beside will light up;
3. Push S button three times to enter menu<PIP> and the LED indicator beside will light up;
Push MENU and rotate and push
「
Y
」
knob to
enter the ninth menu item<INFO>
INFO shows Device SN,IP address,MAC
address,MAC address,MCU version,Video version.