To Next PageTo Next Page
Need help?Do you have a question about the Rheem 627 series and is the answer not in the manual?
General| Category | Water Heater |
|---|---|
| Brand | Rheem |
| Fuel Type | Electric |
| Type | Tank |
| Energy Factor | 0.95 |
| Voltage | 240V |
| Series | 627 Series |
| Capacity | 50 gallons |
Covers water heater application, model types, operational principles, gas boosting, and essential safety information.
Details on circulated systems, safety precautions, general maintenance, condensate traps, and scheduled servicing.
Instructions for turning the water heater on/off, holiday operation, frost protection, and draining procedures.
Guidance on verifying correct installation, regional specifics, water chemistry effects, and expected lifespan.
Introduces Rheem controllers, detailing standard and deluxe models and their compatibility.
Explains the functions of standard controller buttons, lights, and display panel elements.
Details temperature settings for different controller types and the procedure for adjusting them.
Provides specific operating instructions for standard kitchen and bathroom controllers.
Explains the water volume function for standard controllers, including setting and alarm operation.
Details deluxe controller functions, interface elements, and special features like assistance calls.
Covers voice prompts, operating tones, volume adjustment, and the assistance call function.
Explains temperature settings and the procedure for adjusting them on deluxe controllers.
Provides specific operating instructions for deluxe kitchen and bathroom controllers.
Comprehensive guide to setting up and operating the Bath Fill mode on deluxe controllers.
Details requirements for water supply, including effects of water chemistry and saturation index.
Guides users through common issues like no display, cold water, and fluctuating flow rates.
Addresses frequent gas booster operation, fan issues, flue smells, and vapour from the flue terminal.
Covers pressure relief valve discharge, error codes, and causes of higher than expected gas bills.
Defines installation standards, application suitability, and recommended water heater location.
Covers requirements for ventilation, secondary flue, safe tray, and pipe covers.
Details frost protection systems and requirements for the mains water supply pressure.
Discusses hot water delivery temperatures, scald risks, and integration with solar water heaters.
Explains circulated hot water systems and the use of temperature limiting devices.
Provides diagrams illustrating temperature zones and technical data including dimensions.
Provides dimensional specifications for standard and deluxe controllers.
Details controller types, compatibility, installation locations, wiring, and connection procedures.
Specifies connection sizes for plumbing, water inlet/outlet, and gas inlet details.
Covers pipe sizing recommendations, in-series booster connections, and gas inlet procedures.
Details requirements for secondary flue installation and lists available flue system components.
Specifies flue terminal location clearances and maximum flue run lengths.
Explains flue condensate formation, draining, and the installation of condensate traps.
Provides detailed instructions for installing horizontal and vertical flue runs.
Covers flue terminal clearances and condensate drain line installation for multiple water heaters.
Outlines electrical work requirements, wiring rules, and the water heater's power consumption.
Describes the EZ-Link system, its requirements, notes on dual installation, and label placement.
Provides step-by-step instructions for connecting the EZ-Link cable between water heaters.
Details standard and deluxe controller types, their specifications, and installation location guidelines.
Covers the wiring installation process for kitchen and bathroom controllers, including exposed wiring.
Guides through turning on the water heater and checking gas inlet and test point pressures.
Details checking and adjusting burner gas pressure and managing error codes.
Explains preset outlet temperatures, solar booster integration, and temperature adjustment procedures.
Specific instructions for outlet temperature compensation adjustment on the 866 series model.
Instructions for turning off the water heater and draining it for protection or storage.
Details the general terms of the Rheem warranty and specific exclusions.
Outlines what components are covered, warranty periods, and how to make a claim.
