Rheem AP16697 - Electronic Control Configuration Menu; Navigating Configuration Options; Changing Operating Mode (Performance;Saver); Configuring Advanced Settings

16
CONFIGURATION MENU
– MODE
– CONFIGURE
– STATUS
– HISTORY
PRESS TO
SELECT
ENERGY
SAVER
– HIGH TEMP
- DISPLAY
– BEEP
– INSTANCE
MODE
CONFIGURE
PRESS TO
SELECT
Press and release the
MENU/SELECT buon to
enable the configuraon
menu.
Use UP/DOWN arrow buons
to scroll through the available
configuraon sengs.
Press MENU/SELECT buon
to choose the desired menu
item. See below for further
opons.
The MODE menu is used to
change the water heater from
PERFORMANCE mode to
ENERGY SAVER mode.
Use DOWN arrow to change
the mode.
The CONFIGURE menu is used to
change addional sengs for the
water heater performance and display
opons.
Press the DOWN arrow buon to
scroll through the available sengs.
Press MENU/SELECT buon to choose
the desired configuraon opon.
See following sheet for explanaon f
or
each configuraon seng.
*Note: If screen is
dimmed press any
buon and release
to brighten the
display before
performing desired
acon.
Programming the Electronic Control