TM090 12-26 Series II CFGWH Service Instructions
REV AB – Issued February 2019
This document is stored and maintained electronically by Rheem Technical Support. All printed copies are deemed “uncontrolled”
SPECIFICATIONS continued
Kitchen Controller P/N 299853
Bathroom 1 Controller P/N 299854
Bathroom 2 Controller P/N 299855
Deluxe Kitchen Controller P/N 299861
Deluxe Bathroom 1 Controller P/N 299862
Deluxe Bathroom 2 Controller P/N 299863
Kitchen controller cable P/N 299856
Bathroom controller cable P/N 299857
Standard P/N 299287 – NG models only.
Extended P/N 299285 – 26L NG model only
Product Changes
EziSET
®
- Smartphone Remote Control
EziSET
®
enables remote control of a CF water heater via a smartphone where the hot water
temperature set point and bath fill features can be controlled by the user through an App
installed on their own personal smartphone. Additionally, any applicable fault codes and
service contact details will be displayed on the App in the event of a heater fault.
EziSET
®
is not provided as standard with the CF heater, it is an optional extra that is
available to purchase in kit form that is to be retro-fitted to a new or existing installation.
Available from February 2019 using part number 052310 the kit is suitable for use with 50
o
C
models only (suitable for use with 876812 / 876T16 / 876820 / 876T26 models manufactured
from 2018).
The kit is required to be installed by a qualified technician; it includes a PCB that is to be
fitted inside the water heater and a Power Line Telecommunication (PLT) plug that is to be
connected to a GPO and wireless router in the home (wireless router is not supplied however
any home with an existing Wi-Fi network will have one).
The householder is responsible for the download of the free EziSET
®
App to their own
compatible smartphone. Must have a minimum operating system of iOS 8.1 (iPhone 5 or
later; excluding iPhone 5C) or Android 4.0 or later (Windows phone is not compatible).
Up to 10 devices can simultaneously communicate with an EziSET
®
enabled heater
however only one user at a time can have priority control and alter heater settings.
The conventional hard-wired remote temperature controllers will continue to be available for
use where a home Wi-Fi network or a compatible mobile device are not available.