HEAT PUMP AND TANK ASSEMBLY
14
storage tank heat pump module heat pump water heater
KIT
There is a kit (PN 299276) supplied with the heat pump module and a kit
supplied with the 410 model heat pump storage tank (PN 290122). The
components supplied in the kit and required for the installation are:
Kit Installation Heat Pump Module Integrated
Installation instructions heat pump module integrated
Saddle clamp 20 mm Clipsal 261/20
Screw phillips pan head No. 8 x 13 zinc plated black
Screw pack of 3 M6 x 12 HD bolts
Screw hilo 13-16 x 20 pan head combination zinc plated
Kit Heat Pump Module Seal 410
Cover strip heat pump housing top
Tape foam 406E 18 mm x 7 mm thick
To Next Page
Loading...
Need help?
General