58
Accessories Screen
The accessories screen includes the auxiliary and
extended heater controls in the Raymote mobile app.
These controls allow users to command an Auxiliary relay
that can be wired to turn on and off a pump, lights or water
features.
This screen also provides control to Raypak Protege
variable-speed pump when connected to the heater. See
Figure 90.
Figure 90. Crosswind V Accessories
A
WARNING: Only authorized users have access to
remotely control the heater, do not provide access to
unauthorized users.
NOTE: Check Section 27 "External Control Outputs"
section for details of wiring and rating of the built-in
auxiliary relay.
Some controls are application dependent and may not be
available on all units. When a control or set of controls are
not available, these will be grayed out.
Raymote controls will reect the actual status of the value
on the local unit. When a change is applied to any control
item, the position of the selector will reect the conrmation
value of the setting. See Figure 90.
NOTE: Use your smartphone camera to open QR link
below to access the latest instructions and detailed
technical support for Raymote and Crosswind V:
https://www.raypak.com/support/tech-corner/raymote/
To Next Page
Loading...
