RHINO 6000 User Manual

2
2. Connecting the power
The label printer can operate using the rechargable battery pack or the AC power
adapter. For temporary backup power, six AA alkaline batteries can be used.
To charge the battery pack the first time you
use the printer, insert the battery pack and plug
in the power adapter. Charging the battery
pack the first time takes approximately eight
hours. Recharging the battery pack will take
approximately two hours.
To insert the battery pack
1. Remove the battery compartment cover.
See Figure 2.
2. Insert the battery pack into the battery
compartment.
3. Replace the battery compartment cover.
To connect the power adapter
1. Plug the power adapter into the power
connector on the bottom of the printer.
See Figure 3.
2. Plug the other end of the power adapter
into a power outlet.
Figure 2
Figure 3

RHINO 6000 Specifications

General

Model	Rhino 6000
Print Resolution	300 dpi
Keyboard Type	QWERTY
Print Technology	Thermal Transfer
Power Source	AC Adapter / Battery
Connectivity	USB
Label Type	Industrial Labels
Display	LCD
Supported Label Materials	Vinyl
Power Supply	AC Adapter
Label Compatibility	Industrial Labels