Need help?Do you have a question about the RHINO RFCEC001 and is the answer not in the manual?
Details the main unit of the fan controller.
Describes the included temperature sensor.
Refers to the instruction booklet itself.
Lists components for physical installation.
Indicates the current fan speed setting.
Shows the status of the controller lock feature.
Displays the target temperature set by the user.
Shows the current ambient temperature reading.
Indicates the configured alarm temperature threshold.
Signifies the controller is in automatic operation.
Alerts the user to an active alarm condition.
Indicates the controller is in manual operation.
Symbolizes temperature-related displays or settings.
Button used to turn the controller on or off.
Button used for mode selection or other functions.
Button to increase values or navigate upwards.
Button to decrease values or navigate downwards.
Marking and pre-drilling wall for mounting bracket.
Securing mounting bracket to the wall.
Attaching controller to the mounting knobs.
Connects one fan and thermal probe to NTC/OUT1 ports.
Connects two fans and thermal probe to NTC/OUT1/OUT2.
Connects three fans and thermal probe to NTC/OUT1/OUT2/OUT3.
Connects four fans and thermal probe to NTC/OUT1-OUT4.
Details how the controller powers up and indicator status.
Method to select temperature display units (C or F).
Procedure to disable the screen backlight.
How to activate/deactivate the button lock feature.
Steps to switch between automatic and manual operation.
Maintains a constant fan speed regardless of room temperature.
Details the six speed levels and their corresponding outputs.
Ensures AUTO icon is displayed for automatic mode.
Setting the desired temperature range (0°C to 60°C).
Setting the minimum fan speed when target temperature is met.
Explains how fan speed changes with temperature deviations.
Setting a temperature threshold to trigger maximum fan speed.
How to enable the temperature alarm feature.
How to disable the temperature alarm feature.
Enabling alerts for fan failures on specific ports.
Explains error codes (E1-E4, Er) for fan or probe issues.
Details CE marking and relevant EU directives.
Covers product guarantee, terms, and exclusions.
Instructions for responsible product disposal and recycling.
Details the main unit of the fan controller.
Describes the included temperature sensor.
Refers to the instruction booklet itself.
Lists components for physical installation.
Indicates the current fan speed setting.
Shows the status of the controller lock feature.
Displays the target temperature set by the user.
Shows the current ambient temperature reading.
Indicates the configured alarm temperature threshold.
Signifies the controller is in automatic operation.
Alerts the user to an active alarm condition.
Indicates the controller is in manual operation.
Symbolizes temperature-related displays or settings.
Button used to turn the controller on or off.
Button used for mode selection or other functions.
Button to increase values or navigate upwards.
Button to decrease values or navigate downwards.
Marking and pre-drilling wall for mounting bracket.
Securing mounting bracket to the wall.
Attaching controller to the mounting knobs.
Connects one fan and thermal probe to NTC/OUT1 ports.
Connects two fans and thermal probe to NTC/OUT1/OUT2.
Connects three fans and thermal probe to NTC/OUT1/OUT2/OUT3.
Connects four fans and thermal probe to NTC/OUT1-OUT4.
Details how the controller powers up and indicator status.
Method to select temperature display units (C or F).
Procedure to disable the screen backlight.
How to activate/deactivate the button lock feature.
Steps to switch between automatic and manual operation.
Maintains a constant fan speed regardless of room temperature.
Details the six speed levels and their corresponding outputs.
Ensures AUTO icon is displayed for automatic mode.
Setting the desired temperature range (0°C to 60°C).
Setting the minimum fan speed when target temperature is met.
Explains how fan speed changes with temperature deviations.
Setting a temperature threshold to trigger maximum fan speed.
How to enable the temperature alarm feature.
How to disable the temperature alarm feature.
Enabling alerts for fan failures on specific ports.
Explains error codes (E1-E4, Er) for fan or probe issues.
Details CE marking and relevant EU directives.
Covers product guarantee, terms, and exclusions.
Instructions for responsible product disposal and recycling.
General| Brand | RHINO |
|---|---|
| Model | RFCEC001 |
| Category | Controller |
| Language | English |
To Next Page
