RHINO TM100 User Manual (English)

Questions and Answers:

H
Hector HernandezAug 14, 2025
Why is my RHINO Lawn Mower streaking?
- S
  Scott ChoiAug 14, 2025
  If your RHINO Lawn Mower is experiencing streaking, several factors could be the cause. You might be mowing too fast, so try slowing down. The blade speed could be too slow; ensure the PTO is operating at 540 RPM. Other potential causes include worn or dull blades (sharpen uniformly or replace with Genuine RHINO Blades), a loose drive belt (tighten it), a glazed or slipping belt (apply belt dressing or replace with a special RHINO belt), or a blade loose on the spindle (tighten the blade bolt securely to 85 ft. lbs. using left-hand threads). Also, check if the conditions are too wet for mowing; if so, allow the grass to dry before mowing.
K
kimberlymooreAug 17, 2025
What to do if the belt is slipping on my RHINO TM100?
- P
  Pamela WalkerAug 17, 2025
  If your RHINO Lawn Mower belt is slipping, it may be due to several reasons. The belt might be loose, glazed, or have oil on it. Try replacing it with a special RHINO belt, using belt dressing, or cleaning it, respectively.
L
Lori MillerAug 20, 2025
Why is my RHINO TM100 vibrating so much?
- J
  James AndersonAug 20, 2025
  If your RHINO Lawn Mower is experiencing heavy vibration, it could be due to several reasons. Make sure that you do not exceed 540 PTO rpm because the blade speed might be too high. Check the blades for damage, wear, or imbalance; replace broken or bent blades with genuine RHINO blades, and grind worn or unbalanced blades uniformly or replace them. Also, inspect the sheave for bends or breaks and replace the parts if needed. Finally, check for any trash caught on the blade and clean it off.