OPERATION
TM60/72/84/100 02/11 Operation Section 4-3
© 2011 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
TM60 TM72 TM84 TM100
Cutting Width 60” 72” 84” 100”
Overall Width 61-3/4” 74” 86” 103”
Overall Length 64” 70-1/4” 76” 87”
Cutting Height 3/4” - 5-1/4” 3/4” - 5-1/4” 3/4” - 5-1/4” 3/4” - 5-1/4”
Height Adjustment Single Adjustable Bushing
Hitch Floating CAT l, CAT I Q.H. Floating CAT I-II QH
Blades 5/16” x 2-1/2” 5/16”x2-1/2” 5/16”x2-1/2” 3/8” x 3”
Blade Overlap 1-7/8” 2-1/4” 2-5/8” 2-7/8”
HP Required(Min.) 16 HP 22 HP 30 HP 35 HP
Gearbox Rating (540 RPM)** 55 HP 55 HP 55 HP 55 HP
Gearbox Ratio 1:2.8 1:2.8 1:2.8 1:2.8
Blade Spindle Three, 1-3/8” Diameter
Tapered Roller Bearing
Blade Tip Speed: 18,075 FPM 18,241 FPM 18,273 FPM 18,200 FPM
Cutting Capacity (Max) Grass Grass Grass Grass
Driveline Size Cat 3 Cat 3 Cat 3 Cat 3
Driveline Protection “B” Size Belt “B” Size Belt “B” Size Belt “B” Size Belt
Deck Thickness 3/16” 3/16” 3/16” 3/16”
Side Skirts 3/16” x 6” 3/16” x 6” 3/16” x 6” 3/16” x 6-1/2”
Blades 3, Updraft 3, Updraft 3, Updraft 3, Updraft
Tractor PTO 540 540 540 540
Extended Floating Hitch Std. Std. Std. Std.
Tires and Wheels Four, Pneumatic 410/350 x 6 (12.5” Diameter)
or Semi-Pneumatic 12.5 x 3.625 (12.5” Diameter)
Discharge Rear Rear Rear Rear
Weight 573 lbs. 655 lbs. 762 lbs. 1020 lbs.
*Safety Deflectors are standard equipment. Single and double chain guards are available as extra equipment
at extra cost. Servis-Rhino recommends mowers be equipped with deflectors or double chain guards for all
mowing purposes. Single chain guards may be used for agriculture purposes only and are specifically not
recommended for highway, right-of-way, parks or greenbelt mowing.
**Ratings based on actual field performance.
To Next Page
Loading...
Need help?
General
