Operating Instructions
3. Install the battery
Slide the battery into place until the latch returns to the upper position. There will be an
audible sound when the battery is in position.
4. Connect AC power to P2
The green LED on the power adapter will turn on and there will be an audible sound
when power is connected.
Do not place anything in the power supply port other than
the supplied power cord. Avoid the use of electrical
extension cords with the
P2
.
The power supply is not waterproof.
Do not disassemble the power supply.
When the power is disconnected from the AC outlet,
disconnect it from the concentrator to avoid unnecessary
battery discharge.
To Next Page
Loading...