What to do if an error on the Ethernet is detected on Ricoh 407773?
Turn the Ricoh Printer off, and then turn it on again. If the problem persists, contact your sales or service representative.
What to do if Ricoh Printer says 'There is no paper in the specified tray'?
If your Ricoh Printer displays the message 'There is no paper in the specified tray', load the specified paper in the tray and press [JobReset] to reset the job.
Why is my Ricoh 407773 printing faded images?
If the printed image from your Ricoh Printer is faded across the entire page, it could be because the paper is unsuitable. Printing on coarse or treated paper might result in a faint print image. Use recommended paper.
Why does my Ricoh 407773 Printer take so long to print?
If it takes a long time to complete the print job on your Ricoh Printer, it may be because photographs and other data-intensive pages take a long time for the printer to process. Simply wait when printing such data.
Why does my Ricoh 407773 Printer take so long to resume printing?
If your Ricoh Printer takes too long to resume printing, it is because the printer was in Energy Saver mode or Sleep mode. The printer must warm up, and this takes time until printing starts.
What to do if the proxy user name or password is incorrect on Ricoh Printer?
Check the proxy server settings, and then change the user name and/or password if they are incorrect.
How to fix Ricoh 407773 Printer when the toner is not fixed?
If the toner is not fixed by your Ricoh Printer, for PCL 5c: On the printer driver's [Paper] tab, select a proper paper type in the [Type:] box. For PCL 6/PostScript 3: On the printer driver's [Detailed Settings] tab, click [Paper] in "Menu:", and then select a proper paper type in the "Paper Type:" list.
What to do if updating the @Remote certificate failed on Ricoh 407773?
Turn the Ricoh Printer off, and then turn it on again. If the problem persists, contact your sales or service representative.
Why are images cut off when printing from my Ricoh Printer?
If the images are cut off or excess is printed by your Ricoh Printer, it might be because you are using paper smaller than the size selected in the application. Use the same size paper as selected in the application. If you cannot load paper of the correct size, use the reduction function to reduce the image, and then print.
What to do if Ricoh 407773 Printer waste toner bottle is full?
If your Ricoh Printer displays a message indicating that the waste toner bottle is full, you should replace the waste toner bottle.
To Next Page
General