Ricoh SP 4510dn - User Manual

Questions and Answers

M
Mark StoneJul 27, 2025
What to do if Ricoh SP 4510dn Printer is not automatically recognized?
- P
  Paige MyersJul 27, 2025
  If your Ricoh Printer is not automatically recognized, disconnect the USB cable, turn off the printer, and then turn it on again. After the printer fully boots up, reconnect the USB cable. Also, if Windows has already configured the USB settings, open Windows' Device Manager and remove any conflicting devices under [Universal Serial Bus controllers]. Conflicting devices are marked with a [!] or [?] icon.
T
Thomas WilsonJul 30, 2025
Why are my Ricoh SP 4510dn documents not printing?
- R
  Richard HernandezJul 30, 2025
  Your Ricoh Printer may not be printing documents because the paper output tray is full. Clear the tray to allow new prints to be output. Alternatively, the printer might be out of paper; in this case, you should load more paper into the printer.
M
Melanie GrayAug 4, 2025
What to do if my Ricoh SP 4510dn is not automatically recognized?
- C
  Cynthia ReillyAug 4, 2025
  If your Ricoh Printer is not being automatically recognized, it might be due to a problem with the USB connection. Try disconnecting the USB cable, turning off the printer, and then turning it back on. After the printer fully boots up, reconnect the USB cable. Another potential cause is that Windows has already configured the USB settings. Check Device Manager for conflicting devices under [Universal Serial Bus controllers] and remove them. Conflicting devices are marked with a [!] or [?] icon.
B
Brian RivasAug 8, 2025
What to do if my Ricoh SP 4510dn Printer is unable to connect to the network?
- J
  Jason GrayAug 8, 2025
  If your Ricoh Printer cannot connect to the network, a network error might have occurred. Check the displayed message and take appropriate action. Also, ensure that the printer is correctly connected to the network and properly set up. If problems persist, contact your network administrator. If the indicator remains lit after troubleshooting, contact your service representative.
J
Jason WallAug 13, 2025
How to fix error occurred on Ricoh SP 4510dn?
- S
  Susan ClaytonAug 13, 2025
  An error has occurred because a function with the status "Error Occurred" in the [Check Status] screen is defective. Press [Check] on the printer, then check the displayed message and take the appropriate action to resolve the error.
C
Cassandra KramerAug 17, 2025
What to do if my Ricoh SP 4510dn Printer printing does not start?
- R
  Rebekah StevensonAug 17, 2025
  If printing does not start on your Ricoh Printer, there could be several reasons: * The printer might be turned off. Ensure that the main power switch is turned on. * An error message might be displayed on the control panel. Check the display for any error messages or warning statuses and take the required action. * The interface cable might not be connected correctly. Ensure that the interface cables are properly connected. * The wrong type of interface cable might be in use. Make sure you are using the correct cable for your computer, and replace it if it is damaged or worn. * The interface cable might have been connected after the printer was switched on. Connect the interface cable before turning on the main power switch.
T
Tony YoungAug 21, 2025
What to do if printing does not start when using the extended wireless LAN in Ad-hoc Mode on Ricoh SP 4510dn Printer?
- J
  jonathan20Aug 21, 2025
  If printing does not start when using the extended wireless LAN in Ad-hoc Mode, the correct Communication Mode may not be set. Turn the main power switch off and then back on again. Change [Communication Mode] in [System Settings] to [802.11 Ad-hoc Mode], and then select [Off] for [Security Method].

Ricoh SP 4510dn Specifications

General

Color	No
Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Printing colors	Black
Maximum duty cycle	150000 pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Total input capacity	600 sheets
Maximum input capacity	1600 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight	52 - 162 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Letterhead
Maximum ISO A-series paper size	A4
Wi-Fi	-
Supported network protocols (IPv4)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Storage media	HDD
Internal memory	512 MB
Maximum internal memory	1536 MB
Internal storage capacity	320 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1110 W
Power consumption (printing)	- W
Power consumption (PowerSave)	1 W
Product color	Grey, White
Cables included	AC