EasyManuals Logo

Ricoh SP 4510dn User Manual

Ricoh SP 4510dn
955 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #270 background imageLoading...
Page #270 background image
If a certificate issued by a certificate authority is installed in the printer, confirm the certificate store
location with the certificate authority.
To change the host name or IP address in [Common Name] of the device certificate when using the
operating system's standard IPP port under Windows Vista/7/8/8.1 or Windows Server
2008/2008 R2/2012/2012 R2, delete any previously configured printer beforehand and re-
install it after changing [Common Name]. Also, to change the user authentication settings (login
user name and password), delete any previously configured printer beforehand and re-install it
after changing the user authentication settings.
Setting the SSL/TLS Encryption Mode
By specifying the SSL/TLS encrypted communication mode, you can change the security level.
Encrypted communication mode
Using the encrypted communication mode, you can specify encrypted communication.
Encrypted communication mode Description
Ciphertext Only
Allows encrypted communication only.
If encryption is not possible, the printer does
not communicate.
Ciphertext Priority
Performs encrypted communication if
encryption is possible.
If encryption is not possible, the printer
communicates without it.
Ciphertext/Cleartext
Communicates with or without encryption,
according to the setting.
After installing the device certificate, specify the SSL/TLS encrypted communication mode. By making
this setting, you can change the security level.
1. Log in as the network administrator from the printer's control panel.
2. Select [Host Interface] Press [OK]
3. Select [Network] Press [OK]
4. Select [Permit SSL/TLS Comm.] Press [OK]
5. Select the encrypted communication mode.
Select [Ciphertext Only], [Ciphertext Priority], or [Ciphertext/Cleartext] as the encrypted
communication mode.
5. Enhanced Network Security
124

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP 4510dn and is the answer not in the manual?

Ricoh SP 4510dn Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLED
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)5 s
Print speed (black, normal quality, A4/US Letter)40 ppm
Printing colorsBlack
Maximum duty cycle150000 pages per month
Number of print cartridges1
Page description languagesPCL 5e, PCL 6
Total input capacity600 sheets
Maximum input capacity1600 sheets
Paper tray media typesPlain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight52 - 162 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Multi-purpose tray media typesLetterhead
Maximum ISO A-series paper sizeA4
Wi-Fi-
Supported network protocols (IPv4)TCP/IP
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
Storage mediaHDD
Internal memory512 MB
Maximum internal memory1536 MB
Internal storage capacity320 GB
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)1110 W
Power consumption (printing)- W
Power consumption (PowerSave)1 W
Product colorGrey, White
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth392 mm
Width370 mm
Height306 mm
Weight14000 g

Related product manuals