EasyManuals Logo

Ricoh SP 4510dn User Manual

Ricoh SP 4510dn
955 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #612 background imageLoading...
Page #612 background image
Offset Range Meaning Error Code
7 DATA - The specific
operands, parameters
and/or data fields as
appropriate for the given
command.
Reserved Bytes
Throughout the command descriptions in the following chapters, some data fields, bytes, and bits are
specified as reserved.
When the description for a reserved field, byte, or bit specifies "should be zero," the printer does not
check the contents of the bytes or bits. The reserved data should be set to zero, because they could be
defined in future changes to the printer. However, non zero values do not cause an error and are
ignored by the printer.
When the description for a reserved field, byte, or bit specifies it "must be zero," the printer checks the
contents of the bytes or bits and will return error status to the host if the field contains a non zero value.
Flag Byte
Bit 7 is the Persistent NACK bit for 3270 Non-SNA DSC (Data Stream Compatibility) Mode NACKs.
This bit has no meaning in other attachment environments.
Valid values for the Acknowledge Reply Flag byte are described in the Intelligent Printer Data Stream
Reference.
Correlation ID (CID)
The correlation ID (CID) is an identifier of a specific instance of an IPDS command.
It is used to correlate errors with the command that generated them.
It is not possible to correlate all errors with particular IPDS commands. Mechanism errors (for example,
out of paper position checks and unpopulated character positions in resident fonts) are never correlated.
Therefore, it is possible for some NACKs to be returned without correlation numbers even if all
downstream commands had correlation numbers.
1. IPDS Overview
22

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP 4510dn and is the answer not in the manual?

Ricoh SP 4510dn Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLED
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)5 s
Print speed (black, normal quality, A4/US Letter)40 ppm
Printing colorsBlack
Maximum duty cycle150000 pages per month
Number of print cartridges1
Page description languagesPCL 5e, PCL 6
Total input capacity600 sheets
Maximum input capacity1600 sheets
Paper tray media typesPlain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight52 - 162 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Multi-purpose tray media typesLetterhead
Maximum ISO A-series paper sizeA4
Wi-Fi-
Supported network protocols (IPv4)TCP/IP
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
Storage mediaHDD
Internal memory512 MB
Maximum internal memory1536 MB
Internal storage capacity320 GB
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)1110 W
Power consumption (printing)- W
Power consumption (PowerSave)1 W
Product colorGrey, White
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth392 mm
Width370 mm
Height306 mm
Weight14000 g

Related product manuals