Configuring User Authentication
There are five types of user authentication methods: User Code authentication, Basic authentication,
Windows authentication, LDAP authentication, and Integration Server authentication. To use user
authentication, select an authentication method using Web Image Monitor or control panel, and then
make the required settings for the authentication. The settings depend on the authentication method. First
specify administrator authentication, and then specify user authentication.
• If user authentication is not possible because of hard disk or network problems, you can use the
printer by accessing it using administrator authentication and disabling user authentication. For
example, you can do this if you need to use the printer urgently.
User authentication configuration flow
Configuration procedure Details
Configuring administrator authentication page 18 "Specifying Administrator Privileges"
page 19 "Registering and Changing
Administrators"
Configuring user authentication Specify user authentication.
Five types of user authentication are available:
•
page 34 "User Code Authentication"
• page 36 "Basic Authentication"
• page 40 "Windows Authentication"
• page 48 "LDAP Authentication"
• page 53 "Integration Server
Authentication"
User authentication methods
Configuration procedure Details
User Code authentication Authentication is performed using eight-digit user
codes.
Authentication is applied to each user code, not
to each user.
It is necessary to register the user code in the
printer's address book in advance.
Configuring User Authentication
31
To Next Page
Loading...
Need help?
General
Weight and Dimensions
