Ricoh Aficio 1018 - Exiting from the User Tools; Printing the Counter Value

User Tools (System Settings)
14
2
Note
❒ 1: Press to go to the next menu.
❒ 0: Press to go back to the previ-
ous menu.
Reference
P.15 “User Tools Menu (System
Settings)”
D
Change the settings by following
the instructions on the panel dis-
play. Then press the {
{{
{OK}
}}
} key.
Reference
P.16 “Settings You Can Change
with the User Tools”
Note
❒ {OK} : Press to set the new set-
tings and return to the previous
menu.
❒ {Cancel} : Press to return to the
previous menu without chang-
ing any data.
Exiting from the User Tools
A
After changing the user tools set-
tings, press the {
{{
{User Tools/Coun-
ter}
}}
} key.
Printing the Counter Value
Type 1 requires the optional 16 MB copier
memory unit.
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
Make sure “1.Counter” is dis-
played, then press the {
{{
{OK}
}}
} key to
view the total number of prints.
C
Press the {
{{
{Start}
}}
} key.