Copying
28
2
B Push up the paper guide release
lever.
1: Paper guide release lever
C Lightly insert the copy paper face
down, and then adjust the paper
guide.
1: Extender
2: Paper guide
Important
❒
If the guides are not flush against
the copy paper, image skewing
or misfeeds might occur.
Note
❒ Do not stack paper over the lim-
it mark, if you do image skew-
ing or misfeeds might occur.
❒ Swing out the extender to sup-
port paper sizes larger than
A4L, 8
1
/
2
" × 11"L.
❒ Fan paper to get air between the
sheets and avoid multi-sheet
feeds.
D Push down the paper guide re-
lease lever.
"Bypass" is selected automatically.
E Select the paper type and size.
When copying onto standard size
paper
A Press the {#} key.
The "Bypass Tray Paper" screen
appears.
B Press [Select Size].
C Select the paper size.
D Press [OK].
RuC4_AE_Copy-F_FM_forPaper.book Page 28 Thursday, April 14, 2005 1:21 PM
To Next Page
Loading...
