Ricoh Aficio 3025 - Size Magnification

Copier Functions
37
2
Note
❒ You cannot use the bypass tray
with this function.
❒
When using Auto Reduce/Enlarge,
see the following table for original
sizes and orientations you can use:
❖ Metric version
❖ Inch version
❒ You cannot use the Rotated Copy
function when enlarging to B4 JIS
or A3. When enlarging to B4 JIS or
A3 size copy paper, place the orig-
inal in the L orientation.
Reference
p.12 “Sizes difficult to detect”
You can place originals of different
sizes in the ADF at the same time. See
p.16 “Mixed size”.
A Press [Auto Reduce/Enlarge].
B Select the paper tray.
C Place the original, and then press
the {Start} key.
Size Magnification
This function calculates an enlarge-
ment or reduction ratio based on the
lengths of the original and copy.
Note
❒ Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
A Press [Reduce/Enlarge] .
B Press [Specifd. Ratio].
Original location
Original size and
orientation
Exposure glass A3L, B4 JISL,
A4 KL , B5 JIS KL ,
8
1
/
2
" × 13"L
ADF A3L, B4 JISL,
A4 KL , B5 JIS KL ,
A5KL
Original location
Original size and
orientation
Exposure glass 11" × 17"L,
8
1
/
2
" × 14"L,
8
1
/
2
" × 11"KL
ADF 11" × 17"L,
8
1
/
2
" × 14"L,
8
1
/
2
" × 11"KL,
10" × 14"L,
5
1
/
2
" × 8
1
/
2
"KL
RuC4_AE_Copy-F_FM_forPaper.book Page 37 Thursday, April 14, 2005 1:21 PM