Copier Functions
61
2
Note
❒ You can change the width of the
binding margin as follows:
A Press [Edit/Stamp].
B Press [Margin Adjustment].
C Set a binding margin for front
pages. Press [←] and [→] when
setting the left and right margins,
and [↓] and [↑] when setting the
top and bottom margins.
Note
❒ To change the value entered,
press [←], [→], [↓], [↑] to set it.
❒ If you do not need to specify
margins for back side pages,
proceed to step
E
.
D Set a binding margin for back
side pages. Press [←] and [→]
when setting the left and right
margins, and [↓] and [↑] when set-
ting the top and bottom margins.
Note
❒ Margins on the back side of the
page is possible only when [2
Sided] or [Combine 2 Side] is se-
lected.
E Press [OK] twice.
F Place originals, and then press the
{Start} key.
Background Numbering
Use this function to have numbers
printed in the background. This can
help you to keep track of confidential
documents.
Note
❒ You can enter a number between 1
and 999.
Reference
Related default settings:
p.101 “Size”
p.101 “Density”
A Press [Edit/Stamp].
B Press [Stamp].
C Press [Background Numbering].
Metric
version
0–30 mm (increments of 1 mm)
Inch
version
0"–1.2" (increments of 0.1")
ZLFX170E
RuC4_AE_Copy-F_FM_forPaper.book Page 61 Thursday, April 14, 2005 1:21 PM
To Next Page
Loading...
