Ricoh Aficio 3025 - Page 44

Copying
34
2
-Rotated copy
If the orientation of original (L or K) is different to that of the paper you are
copying onto, this function rotates the original image by 90°, fitting it onto the
copy paper. This function works when [Auto Paper Select] or [Auto Reduce/Enlarge]
is selected. See p.32 “Auto Paper Select”.
Note
❒ The Auto Tray Switching default setting is [With Image Rotation]. You cannot
use the Rotated Copy function if this setting is changed to [Without Image Rota-
tion] or [Off]. See p.94 “Auto Tray Switching”.
❒ You cannot use the Rotated Copy function when enlarging onto A3, B4 JIS or
11" × 17", 8
1
/
2
" × 14" size paper. To do this, place original in the L orientation.
❒ You cannot use the Rotated Copy function when [Left 2] or [Top 2] is selected
for stapling when using the 1000-sheet finisher. See p.43 “Staple”.
❒ You cannot use the Rotated Copy function if the Staple function is selected
when using the 500-sheet finisher.
Original size and orientation Copy paper size and orientation
You cannot
rotate:
A4, B5
JIS, or
A5
K
When enlarg-
ing to →
B4 JIS
or A3
However, you
can use:
A4, B5
JIS, or
A5
L
When enlarg-
ing to →
B4 JIS
or A3
GCROTA0E
GCROTA1E
GCROTA2E
GCROTA3E
GCROTA4E
RuC4_AE_Copy-F_FM_forPaper.book Page 34 Thursday, April 14, 2005 1:21 PM