Printer Features
132
5
Host Interface
❖ I/O Buffer
You can set the size of the I/O
Buffer. Normally it is not neces-
sary to change this setting.
• 128 KB
• 256 KB
Note
❒ Default: 128 KB
❖ I/O Timeout
You can set how many seconds the
machine should wait before end-
ing a print job. If data from another
port usually arrives in the middle
of a print job, you should increase
this timeout period.
•10 seconds
•15 seconds
•20 seconds
•25 seconds
•60 seconds
Note
❒ Default: 15 seconds
PCL Menu
❖ Orientation
You can set the page orientation.
•Portrait
•Landscape
Note
❒ Default: Portrait
❖ Form Lines
You can set the number of lines per
page.
• 5 to 128 by 1
Note
❒ Default:
• Metric version: 64
• Inch version: 60
❖ Font Source
You can set the storage location of
the default font.
• Resident
•RAM
•HDD
•SD
Note
❒ Default: Resident
❒ RAM, HDD and SD can be se-
lected only when fonts have
been downloaded to the ma-
chine.
❖ Font Number
You can set the ID of the default
font you want to use.
• 0 to 63 by 1
Note
❒ Default: 0
To Next Page
Loading...
