4. Select [Disp./Print User Counter] using [ ] or [ ], and then press the [OK] key.
5. Select [Clear] using [ ] or [ ], and then press the [OK] key.
6. Select [Per User] using [ ] or [ ], and then press the [OK] key.
7. Select the method of user selection using [ ] or [ ], and then press the [OK] key.
8. Select the user to clear.
If you select Manual in step 7, enter the user code and then press the [OK] key.
If you select Display Destination List in step 7, confirm the user code using [ ] and then press the [OK]
key.
Authentication Information
249
To Next Page
Loading...
Need help?
General
