9. Select the function you want to clear the counter for using [ ] or [ ], then confirm it by
pressing [ ], and then press the [OK] key.
10. Press [Yes].
11. If you want to clear the counter for all users, select [All Users] using [ ] or [ ], and then
press the [OK] key.
12. Select the function you want to clear the counter for using [ ] or [ ], then confirm it by
pressing [ ], and then press the [OK] key.
13. Press [Yes].
14. Press the [User Tools/Counter] key.
5. Registering Addresses and Users for Facsimile/Scanner Functions
250
To Next Page
Loading...
Need help?
General
